Manual control devices (potentiometer) are available in various models, as rotary control (with switch, pushbutton, push-alter-switch) or sliding potentiometers as well as in types for 10mm bore-hole, for standard wall recessed boxes or wall-mounted housing or in modular installation housing.

Types:

Rotary potentiometer with Rotary-Off-Switch, Button + Scale for fitting in 10mm drill-holes

like DPO, however with push-button instead of rotary-switch

Wall recessed - Rotary potentiometer with Rotary-Off-Switch (cover white 80x80 mm)

like DPU, however with pushbutton instead of switch

Wall mounted - Rotary potentiometer with Rotary-Off-Switch (housing white 76x76x52 mm)

like DPA, however with pushbutton instead of switch

Rotary potentiometer for 45mm DIN-rails, with Rotary-Off-Switch

like DPN, however with pushbutton instead of switch

Sliding potentiometer with button+scale (w/out switch)

Wall recessed - Sliding potentiometer + Pushbutton

PUSHBUTTON PANELS
Panels are available in standard version with electro-white frontplate (also alu-eloxicated on request) measurement 145x92 mm or as mini-version 80x80 mm for standard wall boxes.

For NT22:

Pushbuttons Brighter - Darker - On/Off

For NT32:

Pushbuttons Brighter - Darker - Preset - On/Off

For NT38:

Pushbuttons Brighter-Darker-Preset-Automatic-On/Off

For NT42:

Pushbuttons Bright - Stop - Dark - Preset 1 - Preset 2 - On/Off

For NT6:

Pushbuttons Brighter - Darker - 4x Preset - On/Off (with LEDs)

For NT13,
KT13E:

Pushbuttons On/Brighter-Off/Darker-Single-4xPresets

On request: Indication of the choosen function with LEDs, key-switch, LED-line display of the brightness value (at NT22, NT32, NT42)

Encoder-Circuit Board 32x20mm

The devices NT 12V, KT 1VE, WSxxV, WTxxV, NT 17 + 18, KT 2 + 3 as well as the Light-preset-control-devices NT 13 and KT 13E transmit its pushbutton coded commands over a 4-poles connection. The matching operation panels are the types FXCx or FXE6 and FME7

Using normal pushbuttons is possible with Encoder-Circuit-Boards, which can correspondingly encode the pushbutton commands. The circuit boards are very small and can be inserted behind the standard pushbuttons in standard-wall boxes.

Encoder ENC 1
Matching for control devices NT 12V, KT 1VE, WSxxV, WTxxV, NT 17 + 18, KT 2 + 3 with 4-wire-connection

Encoder ENC 3
Matching for control devices NT 188 with 5-wire-connection

Infrared remote controls are available for all of our pushbutton control devices as well as independent operating remote controls for variable control purposes.

Infrared remote controls consists of transmitter, receiver and decoder which is integrated in the controlling device as possible, it is available on various different models with up to 30 channels.

Range: about 10 m

Radio Remote Controls (433 MHz)

8-channel radio remote controls are available for our various control devices as well as indepedent operating remote controls for variable switching purposes.

Range: up to 40m, depending on the surrounding conditions