POTENTIOMETER CONTROLLED DEVICES

The simpliest device for lighting control:

Potentiometer in rotary or sliding models control the connected dimmer devices. Multiple dimmers (also divided in 3 phases) can be control together with one potentiometer for a higher output.
For electronic ballasts with 10V interface, control devices with rotary potentiometer and pushbutton for wall box (Type DEV) are available. You can control up to 50 pieces of 10V dimmable electronic ballasts without additional parts.

PUSHBUTTON DIMMER AND CONTROL DEVICES WITH SIMPLE BRIGHTNESS CONTROLS

Pushbutton dimmer can be operated through a normal push-button, it switches ON/OFF by pressing the button briefly, it dimms BRIGHTER/DARKER by pressing the button longer.

The 1-pushbutton version dimms alternately to brighter and darker, the 2-pushbuttons version allow you to access the specific function you need.

We offer pushbutton control devices for incandescent lamps, low voltage halogen lamps, fluorescent lamps. High loads can be done in combination with additional dimmer devices (also 3 phase). For electronic ballasts with 10V interface, there are control devices with the same functions.

CONTROL DEVICES WITH BRIGHTNESS CONTROLS AND BRIGHTNESS LEVEL PRESETS

For comfortable lighting control, we offer devices with BRIGHTER-DARKER-ON/OFF and up to 8 adjustable Preset-Light Levels. All commands are given through a pushbutton or infrared remote control.

The devices controls either any dimmers or directly the electronic ballasts with 10V interface.

LIGHT PRESETS - LIGHT SITUATIONS - CONTROLS

For lighting control installations with highest comfort, we offer devices with retrievable memory of light situation presets. Aside from the functions BRIGHTER/DARKER and ON/OFF, this devices have up to 8 adjustable Preset-Light Levels which offer through different brightness of several electrical circuits impressive light situations, depending on your momentarily needs.

All commands are given through pushbuttons (panels on several places are possible) or with remote controls.

The devices controls either any dimmers or directly the electronic ballasts with 10V interface.

DAYLIGHT-DEPENDENT AUTOMATIC-CONTROLS
DUAL AND MULTI-FUNCTIONS CONTROLS WITH
PRESENCE DETECTION

For constant brightness and energy saving at the same time, we offer devices which regulate or even automatically switch OFF the artificial light at sufficient daylight.

You can save up to 80% of the energy.

We offer devices for the daylight-dependent switching with 1 or 3 electrical circuits, as well as devices with smooth dimming of artificial light when daylight becomes stronger, therefore practical constant light conditions can be produced.

Further, we offer devices in which beside the light constanter, also a comfortable pushbutton control, as well as full automatic control with presence-dependent switching through a motion detector can be done.

The devices controls either any dimmers or directly the electronic ballasts with 10V interface.

SYSTEM CONTROLS FOR LIGHT, BLINDS, SCREENS ETC.

The lighting control system functions can be extended to operate blinds, screens and any other switching needs.

There are relays and other modules for pushbutton functions and select-switching functions. The switching modules comes with simple modules for ON/OFF switching, modules with 1-pushbutton operation, separate ON and OFF functions as well as ALL-ON and ALL-OFF functions.

REMOTE CONTROL FOR LIGHTING CONTROL SYSTEM +
VARIOUS DEVICES

Infrared and radio remote controls for light, blinds, screens etc.

Infrared and radio remote controls make it possible to control our pushbutton devices the same way as the installed control panels.

The remote control consist of hand transmitter, the infra receiver which will be mounted in the room and the infra-decoder, which is normally integrated in the control devices or the radio receiver/decoder which is mounted on distribution boards.